Used Biesse Edgebander for sale (305)

Condition: used, machine/vehicle number: 007673, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Iodpfxowlplgs Agqoa Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 007848, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Isdpfx Ajwkrqpsgqea Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008030, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Iedpfx Ajwvq Hgegqea Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr Ijdpfxel Txw Hj Agqoa

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Iedpswuz Npsfx Agqoa Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Isdpfxswuz Nij Agqea Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007358, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Isdpfx Aswlpl Tjgqsa Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Ijdjxw T Tpjpfx Agqja Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 94464, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Iodpfoxx Rz Tex Agqea Travel range Y-axis: 1,300 mm Travel range Z-axis: 155 mm Number of work zones: 2 Drilling Head Vertical spindles X-axis: 10 Vertical spindles Y-axis: 12 Horizontal spindles X-axis: 6 Horizontal spindles Y-axis: 2 MACHINE DETAILS Electrical Data Power: 20 kW Voltage: 380 V Current: 25 A Frequency: 50 Hz EQUIPMENT Vertical electrospindle with C-axis vector, automatic tool changer, ISO 30 taper Automatic tool change system with 3 side-mounted positions for aggregates Automatic tool change system with 20 positions and chain 8 manually adjustable bars for suction cup holders with display 3 manually adjustable suction cups per bar 8 pneumatically actuated Bakelite bars for panel lifting Perimeter safety fence Motorized conveyor belt for chip extraction Vacuum pump

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Ijdpew Nytnsfx Agqsa Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT K2 Numerically controlled machining center ROVER A 3.40 FT K2 Working fields: X = 3685 mm; Y =1290 mm; Z = 160 mm The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum Pump 300 m3/h Isdpfx Agex Afvteqsa 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowingunit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 BIESSEWORKS BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with mats (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2011, CNC Machining Center Biesse skill 15 36 G FT Year of construction 2011 Machine no. 52549 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 3765 mm Y axis 1560 mm Z axis 324 mm Inclusive - 2x vacuum pump, Busch Mink MM1322 AV; 360m³/h - Safety mats Spindle bearings need to be replaced, sounds bad. Disassembled for transport on normal trailer; 6000x2400x2400mm; Own weight 2500kg - Year: 2011 - Documentation available: No - CE certificate present: No - Tool clamping system: HSK-F63 - Drilling unit present: No - └ Vertical drilling spindles [pcs.]: 10 Iodpfxjwnh Ife Agqoa - Tool changer positions [pcs.]: 12 - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence, Bumper guard, Safety mat - Vacuum pump present: Yes - └ Brand: Busch Mink - └ Type: MM1322AV - └ Capacity [m³/h]: 360 - Working range X [mm]: 3765 - Working range Y [mm]: 1560 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, KuKa robot with Biesse RBO handling equipment . Made by Biesse - RBO - Table for referanse point indication - 4 meter long beam with carrige for the movement in X direction , parallell to the machine x axis - Schmaltz vacuum system - Separte el cabinet for the robot and other el cabinet for the RBO handling. This robot cell was connected to the Biesse Rover machine until 10.11.2025 , for the handling of panels to end from the machine. All robot function are 100% operative. Sales from the factory close down. Please take a look at incl. video Rekman Maskin & Service - service of cnc machines since 1986 Iedpexy Aftsfx Agqja

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16 Iedpfowuz Ekox Agqja

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,500 mm, Next to new nesting CNC machining center Iodpfx Agoxz Rfqeqsa 4-axis nesting CNC machining center. Purchased new in 10/2019. Has been used for less than 900 hours. The business for which the machine was acquired ceased due to the Corona pandemic, and usage has therefore been very minimal. The machine has been connected to an AL-KO extraction system, which is also for sale in a separate listing. Table size 3600x1500 mm. The machine can be used as a nesting table machine or, by removing the panel, vacuum pods can be used to raise the workpiece for machining. The machine is in full working order in all respects and is an excellent alternative to a new machine. Automatic 10-position tool changer, 2 x Busch rotary vane vacuum pumps (250 m³/h each). The work area can be divided into two separate zones. Drilling unit for vertical and horizontal drilling. Slot saw. Automatic tool height measurement (enables processing the same job with several tools without noticeable height differences). Supplied with bSolid software in Finnish. Suitable saw aggregate and planer aggregate also available for sale. The machining unit features collision sensors, so safety fencing is not required. The buyer is responsible for all costs related to relocation, including the preparation and transport of the machine (these services can be arranged, for example, through the machine's importer).

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Iedpfx Agoxzb Iisqsa Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: excellent (used), Year of construction: 2019, BIESSE AKRON 1440 Airforce system (return system is not included) - Year 2019 - good condition - NC motors, all adjustable from PC control Iodpfxjv A H Ubs Agqea - Premilling • top pressure with belt instead of rollers • Auto infeed edge • Riepe release nebulizer • Glue pot • Air force system • Scissors • Pressure zone 3 rollers • Riepe antistatic nebulizer • Double saw unit 0-15° • Riepe lubricant nebulizer for delicate edges • Double motor corner rounding unit • Riepe cleaning nebulizer • Edge scraping unit • Glue scraping

Condition: used, Year of construction: 2014, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2014 - Documentation available: No Iedjxr Evlspfx Agqea - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - CNC options: Label machine, Loading system, Unloading system Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), CNC drilling centre, drilling machine Biesse Skipper V31 Working area: X length: 200 - 3000 mm Y width: 70 - 900 mm Ijdpfexztm Rex Agqsa Z thickness: 10 - 70 mm Milling spindle power: 4.5 kW 10 vertical spindles, 6 horizontal drills (4 drills on X axis, 2 drills on Y axis), Grooving saw on X axis, Machine is in very good condition, drilling unit and axes run quietly, CE marked, Year: 2020, operating hours: 2210 h Weight: 1300 kg, machine dimensions ready for operation: 380 cm x 200 cm h-260 cm, Connection power: 10 kW

Condition: used, machine/vehicle number: 008134, X axis working area: 5780 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Iedsw Idgispfx Agqea Total number of drilling spindles: 32 Total number of tool changer positions: 28

Condition: used, functionality: unexamined, Ferwood Code: RU0008928 - Manufacturer Code: 631417200 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Iedpfxsv Hpyhe Agqoa

Condition: used, Year of construction: 2014, Price: On request CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks Iedjwnhanopfx Agqoa X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Year: 2014 - Documentation available: Yes - CE certificate present: No - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, functionality: unexamined, Ferwood Code: RU0008932 - Manufacturer Code: DRG4425 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Iodov Hp Avopfx Agqea

Condition: used, Year of construction: 2020, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Iedsx Ad R Njpfx Agqea These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2020 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 1000040377 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, functionality: unexamined, Ferwood Code: RU0008939 - Manufacturer Code: G461 02-10 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ijdpjv Hp H Uofx Agqsa