Used Hardinge Cnc Lathe for sale (39)

Condition: used, Year of construction: 2007, A 2007 Built Hardinge Bridgeport XR760 with Fanuc 18iM control, 12,000 RPM RPM spindle with through coolant, 30 tool rapid ATC & swarf conveyor X Axis 760mm, Y Axis 610 mm, Z Axis 610 mm Working Surface 1000 x 600mm, Table Load 900 kg, Number of T-Slots 5, T-Slot Size 18 mm, T-Slot Center Dimension 100 mm Table Surface to Spindle Gauge Plane Distance 100 to 710 mm Feedrate Range (X and Y Axis) .0025 - 20 m/mm Feedrate Range (Z Axis) .0025 - 20 m/mm Ball Screw Dia. and Pitch (X and Y Axis) 45 x 16 mm, Z Axis 45 x 12 mm, Spindle 12,000 RPM Fanuc Motor HP Rating (S6 40%) 25Kw, Torque (S6 40%) 159.2Nm, Spindle Taper BT 40 Magazine Capacity 30 Tools Max. Tool Diameter 125 mm (adjecent pocket) 80 mm Max. Tool Length 300mm, Max. Tool Weight 7 kg, Coolant and Chip Management Swarf Removal Chip Conveyor, Coolant Tank Capacity 355L, Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard, Through Spindle Coolant Accuracy - ISO 230-2. Positioning - A 0.010 mm, Repeatability - R 0.004 mm, Machine Size, Machine Dimensions (WxD) 2528 x 3000 mm. Electrical Supply (Input)—Balanced 3-Phase 50 or 60 Hz, Power 25 KVA, Voltage, Compressed Air (Pressure / Flow) 4.9 cfm, Coolant Flow Rate at Cutter 160 L/min. Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min Control: Fanuc 18iM Specification: Travel X 760 Y 610 Z 610 mm | 12000 RPM | BT40 Accessories: 30 tool rapid ATC & swarf conveyor Nledpsvkwk Aefx Afxoh Name of machine: Hardinge Bridgeport XR 760 Rapids: Auto Mode (X and Y Axis) 43 m/mm. Auto Mode (Z Axis) 36 m/mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller model: Siemens 810D, spindle speed (max.): 8,000 rpm, Hardinge VMC‑1000 P3 Vertical Machining Centre Nsdpfxjw Etq Te Afxolh Year : 2006 Control: Siemens 810D X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Linear way Table size: 1120 × 510 mm Spindle taper: BT‑40 Spindle speed: up to 8000 rpm Spindle motor power: 13 kW Rapid traverse X/Y/Z: 30 000 mm/min Tool changer capacity: 20 tools Coolant-through-spindle: 20 bar Chip conveyor: included Machine footprint (approx): 3300 × 2100 × 2100 mm Alle technische specificaties zijn ontleend aan betrouwbare bronnen. Voor uw zekerheid adviseren wij deze nogmaals te controleren.

Year of construction: 2005, condition: ready for operation (used), Control Unit Brand FANUC Model Oi-TC Additional Equipment Including bar feeder EMT SUPER 80 (300-1550 mm) / Including tooling, jaw chuck, collet chuck, set of collets (round, hexagon) This HARDINGE Talent 8/52 was manufactured in 2005. It features a FANUC Oi-TC control system, a 12-position turret, and a maximum spindle speed of 5000 rpm. Dimensions are 2100 x 1600 x 1850 mm, and it includes a bar feeder EMT SUPER 80. If you are looking to get high-quality turning capabilities, consider the HARDINGE Talent 8/52 machine we have for sale. Contact us for more information. Application Types Turning Nsdpfxewug S Nj Afxjlh

Condition: like new (used), NVA000025738AK Spindle Cartridge 8K/12K 8,000rpm / 12,000rpm e.g. f. Hardinge GX600 Spare part condition: - unused Warranty: - no Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost Nlsdpfx Aev Avc Iefxoh #Work spindle #milling spindle

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, table width: 600 mm, table height: 560 mm, table length: 1,200 mm, table load: 900 kg, spindle speed (max.): 12,000 rpm, Machine with just revised spindle, never used after Connected to power and available for inspections and tests Lubrication through spindle 30 Tools Nlsdpsrb Amlofx Afxeh Heidenhain 530

Condition: used, Year of construction: 2011, Used 2011 Hardinge plied with 8000 RPM Spindle, 30 station ATC, Swarf conveyor, coolant equipment & manual set. SPECIFICATION: TRAVELS: X Axis 1020 mm, Y Axis 540 mm, Z Axis 540 mm Spindle Nose to Table (~ max) 685 mm, Spindle Nose to Table (~ min) 145 mm TABLE: Length 1120 mm, Width 540 mm T-Slot Width 18 mm, T-Slot Centre Distance 160.0 mm, Number of Std T-Slots 3 Max Weight on Table (evenly distributed) 700 kg SPINDLE: Max Rating 17.4 hp 13 kW, Max Speed 8,000 rpm, Max Torque 82.76 Nm, Drive System Direct Speed Belt Drive, Taper Nodpfovq Ry Djx Afxelh BT 40, Bearing Lubrication Air/Oil Injection Cooling Air Cooled FEEDRATES: Rapid and Jog (Max.) 36 m.min Cutting Feed Rate (Max.) 12 m.min AXIS MOTORS: Axis Motor Rating X Y Z - 2.29 12,29 3.3 KW TOOL CHANGER: Type Carousel, Capacity 20 Max tool diameter 89 mm Tool length Max. 250 mm Tool weight Max. 6 kg Tool change time 6 sec GENERALS: Air Required 4 scfm, 700 psi /min Power supply 45A FLA / 400 v / 3 phase Coolant Capacity 360 L Control: Siemens 828D Spec: Travel X 1020 Y 540 Z 540 mm | Max spindle RPM 8,000 | BT40 Accessories: Swarf conveyor, Coolant equipment, 20 tool ATC

Condition: like new (used), NVA000025706AK Spindle Cartridge (12K-RPM GREASE TYPE) 12,000rpm e.g. f. Hardinge VMC600 Spare part condition: - unused Warranty: - no Njdpfx Afov Au Ucoxelh Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: used, Year of construction: 2008, Used 2008 built Hardinge Bridgeport GX 600 in immaculate condition,with Heidenhain i530 control, swarf conveyor & fitted with the optional 12,000 RPM BT 40 spindle, an option very rarely fitted to this model! USB Port Please Note: Photos of the machine are taken as installed, better pictures will be taken on arrival. Control: Heidenhain i530 Spec: X600 Y540mm Z510 mm | 12000RPM | BT40 Accessories : swarf conveyor, USB Port Nedovq Ry Ropfx Afxolh Spindle: 20 HP (15kw) Spindle speed: 12,000 rpm (belt-driven) Rapid traverse rates: 30M/Min Tool changer: 20 Working surface: 750mm x 540mm Floor space: 2215 mm x 2490 mm Max machine height at tool changer position: 2713mm Approx machine weight: 5500kg

Condition: like new (used), 36001A7390 Spindle Cartridge NEII/15-1 SKF e.g. for Hardinge VMC760 Spare parts for sale Njdjv Au N Tjpfx Afxelh Spare part condition: - unused Bsm2Vxpxka Warranty: - no Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: like new (used), SKF B-1040613 Spindle Cartridge 12K with coolant trough spindle e.g. for Hardinge/Quaser/Bridgeport VMC 1000XP3 Spare parts for sale Spare part condition: - unused Nledev Ai Anepfx Afxoh Warranty: - no Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: like new (used), 7239892SE Spindle Cartridge 12K 12,000rpm e.g. f. Hardinge VMC 1000 XP 2 sets for sale Spare part condition: - unused Warranty: - no Payment conditions: Nledpfxov Aizqj Afxeh - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: like new (used), SN4R0150010 Spindle Cartridge 8K 8,000rpm e.g. for Hardinge VMC 1500 Spare parts for sale Spare part condition: - unused Warranty: Nodev Aixvepfx Afxslh - no Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: like new (used), SB4R123610 Spindle Cartridge 12K 12,000rpm e.g. for Hardinge VMC760 Spare parts for sale Spare part condition: - unused Nljdpsv Aiwrjfx Afxsh Warranty: - no Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: like new (used), 7239835SE Main Spindle Cartridge SK40 e.g. for Hardinge VMC560 Spare parts for sale Spare part condition: - unused Warranty: - no Payment conditions: - payment in advance Delivery: Nledpfxov Aimao Afxjh - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle