Used Maho Milling Machine for sale (466)

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Nedpfxeym R Tgj Afcswc Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Nwodpfx Afswglfxjcec Rotary table with B and C axes Travel measuring system with correction Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,500 mm, overall weight: 10,600 kg, number of axes: 4, This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Nwedpfx Afex I S Shscsc Additional equipment • 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree • Workpiece probe • Internal cooling • Large coolant tank with automatically coated filter paper Machine Benefits Technical Machine Benefits • Table size: 400 x 400 mm • Tool magazine: 60 positions Extra Information Machine still under power Dimensions Machine Depth 6000 mm Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, controller model: Millplus V400, number of axes: 3, This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Control & Electrical • Control: Millplus V400 • Screen: Color, text in German/English • Operating Voltage: 400 V, 50 Hz • Control Voltage: 24 V • Drive: Digital with overload protectionSpindle & Tooling • Spindle: With quill • Maximum Spindle Speed: 6,300 rpm (speed range with gearbox: 20–6,300 rpm) • Tool Holder: ISO 40 – DIN 69871 • Pull Stud: DIN 69872 Form A Nwedpfx Ajx D Nalsfcoc • Tool Changer: 24–25 tool positionsWorking Area & Movement • Longitudinal (X) Travel: 600 mm • Cross (Y) Travel: 525 mm • Vertical (Z) Travel: 500 mm • Rapid Traverse X/Y/Z: 18 m/min • Feed Rate: Up to 10,000 mm/min • NC Rotary Table: 3-axis on fixed tableCooling & Accessories • Coolant System Capacity: 150 L • Full Enclosure: Yes • Paint: Gray / Green (NCS)Documentation • 2 sets, GermanThe machine has a 4-axis C-axis (dividing head)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Nsdpfxoyml U So Afcswc Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: good (used), travel distance X-axis: 1,080 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, In working condition Nodpfx Afeylvb Hscowc

Condition: good (used), travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, In working condition Nwodpfjylvc Djx Afcsc

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rotary table diameter: 1,500 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Nwsdpfx Afsw Ngk Hscjc Automatic head 180/-7° stepless

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head +180/-7° stepless HSK A63 Number of pallets: 2 pcs Pallet size: 1000*800 mm Nodpfxow Ngipj Afcswc

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Nodpfeym Nb Asx Afcswc Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places Nodpfx Afsx Nr Tuscowc • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design Nodpeym Dz Rofx Afcewc - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: ready for operation (used), Year of construction: 2001, operating hours: 28,585 h, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 9,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50T was manufactured in 2001. It features a maximum spindle speed of 9,000 RPM and an impressive X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a turret with 16 positions and a round axis diameter of 700 mm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T vertical machining centre we have for sale. Contact us for further details. • Round axis: dia 700 x 500 • Turning of the table: 360 deg • Swing zone: deg Njdpfx Asympuvefcowc • Positions in turret: 16 Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2000, operating hours: 18,082 h, functionality: fully functional, machine/vehicle number: 1098000194, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, nominal power (apparent): 46 kVA, controller manufacturer: HEIDENHAIN, total height: 3,200 mm, total length: 8,000 mm, total width: 4,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 20,000 kg, operating hours of spindle: 10,403 h, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 125 P Universal Machining Center Nwodpfx Afoym Snrjcsc - Tool holder: SK 40 - Table with 9 T-slots The machine is equipped with a 60-position tool changer, including the tool holders shown in the photos installed in the tool magazine, as well as a chip conveyor and coolant system. Attention: Machine vises shown in the photos are not included! Attention: The machine will be disassembled for transport to a width of 2900 mm (removal of tool changer). Attention: The item must be collected on a binding date agreed between 21/04 and 30/04/2026. FCA D-96257 Marktgraitz – loaded onto truck.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 15025702504, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, table width: 500 mm, table length: 700 mm, table load: 310 kg, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, control voltage: 220 V, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMU 70 VL Universal Machining Center - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Jog mode X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-Axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - max. tool length from spindle nose: 315 mm - max. tool weight for automatic tool change: 6 kg - max. total tool weight in magazine: 80 kg - required compressed air: approx. 5.5 - 8 bar Worktables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - max. table rotation speed: 16.73 rpm - swiveling speed: 14.73 rpm - swivel range: 0 to 180° - input/display increment: 0.001° - weight: approx. 310 kg - one fixed table - dimensions: 1000 x 600 mm - T-slot spacing: 63 mm - number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Note: the machine can be transported on a truck with up to 2800 mm width! Note: The item must be collected between 21.04. and 30.04.2026 at a yet-to-be-agreed date. Njdpfxoym Smbj Afcjwc FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025704014, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 41 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, spindle speed (max.): 18,000 rpm, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DECKEL MAHO DMU 70 VL Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input increment X/Y/Z: 0.01 mm - Setup mode X/Y/Z: 20 - 2000 mm/min - Linear encoder resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without dividing wall): 2350 mm, with dividing wall: 2 x 710 mm - including tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input and display increment: 0.001° - Weight: approx. 310 kg Nwsdpfx Aoym Sd Tsfcoc - Including all tool holders visible on the photos in the tool changer, as well as chip conveyor and coolant system - Note: The clamping systems on the fixture tables are not included in the scope of delivery. Important: The machine can be transported on a truck up to 2800 mm width! Important: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 71.255396, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: MILLPLUS, total height: 2,700 mm, total length: 6,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 900 mm, overall weight: 10,000 kg, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, DECKEL MAHO DMU 80 P Universal Machining Center - Operating voltage: 400 V Nwjdjym Rk Sopfx Afcec - Frequency: 50 Hz - Rated current: 80 A - Table with 9 T-slots - Tool holder: SK 40 The machine is equipped with a 30-position tool changer, including the tool holders visible in the photos within the tool changer, as well as chip conveyor and coolant system. Note: The machine vice shown on the clamping surface is not included in the scope of delivery! Note: The item must be collected between 21/04 and 30/04/2026 at a bindingly agreed appointment. FCA D-96257 Marktgraitz – loaded onto truck

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, With Heidenhain iTNC 530 CNC control Year of manufacture: 2004 Travel paths: X 800 Y 600 Z 700 Spindle speed range: 0 – 12,000 rpm, stepless (SK 40) Including the following accessories: NC rotary tilting table Ø 630 mm Swivel milling head (horizontal + vertical) Universal tool changer with 60 magazine slots as double gripper (SK 40) Full safety enclosure with sliding doors and interior lighting 50 pcs. SK 40 tool holders ICS – 40 bar Chip conveyor Rotoclear Nedpfx Afeym Rnkocjwc 3D measuring probe Heidenhain Electronic handwheel Operating modes 3 + 4 3 height-adjustable machine feet Operating manuals THE MACHINE COMES FROM AN INSTITUTE AND IS IN EXCELLENT CONDITION!! POWER-ON HOURS: 29,496 hrs. PROGRAM HOURS: 10,050 hrs.

Condition: not inspected (used), Year of construction: 2000, operating hours: 26,350 h, functionality: unexamined, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: MILLPLUS, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Submission of a bid obligates timely collection either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Max. spindle speed: 12,000 rpm X-axis feed rate: 20 – 15,000 mm/min Y-axis feed rate: 20 – 15,000 mm/min Z-axis feed rate: 20 – 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Linear encoder resolution X-axis: 0.001 mm Linear encoder resolution Y-axis: 0.001 mm Linear encoder resolution Z-axis: 0.001 mm Input increment X-axis: 0.001 mm Input increment Y-axis: 0.001 mm Input increment Z-axis: 0.001 mm Positioning tolerance X-axis: 0.010 mm Nwjdpfx Aeym Aucjfcec Positioning tolerance Y-axis: 0.010 mm Positioning tolerance Z-axis: 0.010 mm Tool holder: SK 40 Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage control: 350 mm NC rotary table clamping surface: 630 mm diameter T-slot spacing: 63 mm Number of T-slots: 9 Centering bore: 50 mm diameter Max. table rotation speed: 10.7 rpm Table feed rate: 3,600°/min Table encoder resolution: 0.001° MACHINE DETAILS Control: MILLPLUS Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Weight: 10,000 kg Recorded spindle hours: 26,350 h EQUIPMENT 60-position automatic tool changer Chip conveyor Coolant system Note: The machine can be transported on a truck with a width of 3,000 mm. External reference: Elos – Lot 6

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Nwjdpfxsymcvme Afcsc Technical Specification Taper Size HSK 63

Condition: used, operating hours: 18,001 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, nominal power (apparent): 82 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece length (max.): 900 mm, workpiece width (max.): 900 mm, total height: 3,267 mm, total length: 4,523 mm, total width: 8,436 mm, rotational speed (min.): 12,000 rpm, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 80, Year of construction: 2004 Nwedpeylw D Aofx Afcjc CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26000

Condition: used, 1x Used CNC milling machine: Manufacturer: DMG - DECKEL MAHO Model: DMF 220 linear Year of manufacture: 2002 Operating hours: Nwodjyl R Ubopfx Afcsc On-time according to the counter: 42,378 hours Spindle hours according to the counter: 11,472 hours 3-axis machining centre Control: Siemens NC-840D Travel axes: 2,200/560/720 mm

Condition: good (used), CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Philips, control rack from CNC milling machine MAHO MH 800C -PCB: 4022 224 7062 -Card: 4022 224 3433 -Graphic Modem: 4022 224 3451 -Cent Proc: 4022 226 2331 -Drive Mod.: 4022 226 3645 / 4022 226 3690 -LS/LS board: 4022 226 3680 -Inp Outp Mod: 4022 226 3531 2 pieces -Power supply: 4022 226 2270 PE 1870/03 -Individual components: see photos Njdpfx Afeq T T Nhocswc -Price/sale: complete -Dimensions: 375/310/H340 mm -Weight: 13.4 kg

Condition: good (used), Year of construction: 2004, operating hours: 6,700 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: 530 TNC, table width: 600 mm, table length: 1,200 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 26, Equipment: rotational speed infinitely variable, Vertical Machining Center Deckel Maho DMC 103V Year of manufacture: 2004 Control: Heidenhain 530 TNC Operating hours: approx. 6,700 h Technical data: Spindle speed: 1 - 10,000 rpm Drive power: 13 kW Tool holder: SK 40 Travel paths: X-axis: 1,000 mm Y-axis: 600 mm Y-axis: 600 mm Direct measuring system in all axes Accessories: Nwsdpsyl Salofx Afcec Coolant system Preparation for 3D probe

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Nwedpfsyk S Hpex Afcsc Model: DMU 70VL Year of manufacture: 2001