Used Scm Panel Saw for sale (590)

Condition: used, Four-sided planer SCM Sintex 380V 4 spindles Spindle below / above 7.5kW Spindle left/right 7.5kW Hnedpfx Aswng Iwefpeu Max working height 105mm Max working width 180mm Input table 2300mm Spindle diameter 40mm Total dimensions 3400x980x1600mm (LxWxH), weight 925kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Hjdpfx Ajcr S Ecofpjnu Location: Ex stock Bitburg - at special price

Condition: used, Year of construction: 2002, Four-sided moulder SCM Compact 23K Built in 2002 Min/max working height 120mm Min/max working width 230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 100/180mm Input table length 2500mm CNC Program Engines 1st Spindle - Under 5.5kW 2nd/3rd Spindle - Left/Right 11kW 4th Spindle - Up 7,5kW Dimensions 3250x1550x1500mm (LxWxH), Weight 1800kg - Year: 2002 - Documentation available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hsdjwnhk Tjpfx Afponu Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables Hsdpfxocnxayj Afpjnu The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: used, Year of construction: 2003, Four-sided planer SCM Superset XL 6, profiling machine Serial no. AB/158425 Maximum width of the workpiece 230mm Maximum height of the workpiece 120mm All spindles adjustable up/down, right/left diameter of the spindles 40mm Input table length 2470mm Throughput speed 5 to 25 m/min 6 spindles Hodpfxownhzle Afponu 1st spindle under 5.5kW 2nd spindle, right 5.5kW 3rd spindle, left 5.5kW 4th spindle, above 5.5kW 5th spindle, under 5.5kW 6th spindle, universal 7.5kW Transport dimensions 4900x1700x1750mm (LxWxH), weight 2950kg. - Number of spindles [pcs.]: 9 - Year: 2003 - Documentation available: No - Serial number: AB/158425 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Hsdpfx Aecnxa Sofpsnu Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: used, Year of construction: 2005, total width: 1,100 mm, total height: 1,120 mm, total length: 1,000 mm, - Max. planing width [mm]: 500 - Max. planing height [mm]: 250 - Worktable length [mm]: 60 - Worktable width [mm]: 520 - Number of cylinders height adjustment [pcs]: 4 - Extraction nozzle diameter [mm]: 140 - Year: 2005 - Documentation available: No - CE marking present: Yes - Serial number: AB 173436 - Voltage [V]: 400 - Transport dimensions: 1000mm x 1100mm x 1120mm (l x w x h) - Transport packages [pcs.]: 1 Financial information Hjdpfx Afownhmhepsnu VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Motorized thickness table hub with two speeds Numerical display for working height Thicknessing table in cast iron The thicknessing table is supported by four large trapezoidal thread spindles for maximum stability and precision Hjdsd Hx E Ijpfx Afponu Four speeds Optional with two roles in the thicknessing table Equipped with noise and chip protection curtain at the factory Tueckein and outlet Adjustable roll pressure Front feed roller with helical gearing Pull-out roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa Planer knife shaft Planer blades change in seconds When starting the machine, the blades are automatically tensioned - self-arretierend by the centrifugal force The knife protrusion will automatically without the use of setting gauges Work table The working table is supported by four large trapezoidal screw spindles provide greatest stability under all operating conditions As standard with electric table adjustment The Special lifting device correctly maintain the table position, also without lock Helical steel feed rollers for a constant and uniform wood feeding Second, rubber feed roller in the spout Massive arrestors prevent kickback of workpieces A 4-meter shaft ensures an optimal planing image Dimensions and weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Connect dust extraction

Condition: used, Year of construction: 2017, total width: 1,900 mm, total height: 2,150 mm, total length: 1,650 mm, Empty weight: 1.499 kg Price: On request - Number of units [pcs]: 1 - └ Unit 1: - - Type of unit: Combi - - Sanding belt length [mm]: 2150 - - Sanding belt width [mm]: 1150 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Year: 2017 - Documentation available: No - CE marking present: Yes - Serial number: AB00002054 - Voltage [V]: 400 - Current consumption [A]: 36 - Transport dimensions: 1650mm x 1900mm x 2150mm (l x w x h) - Transport weight [kg]: 1499kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hnedpfewl Uffox Afpou Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Motorized thicknessing table stroke with two speeds Numerical display for working height Grey cast iron thicknessing table The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Noise and chip protection curtain at workpiece infeed and outfeed as standard Adjustable roller contact pressure Front infeed roller with helical toothing Pull-out roller with rubber coating Powerful industrial engine Equipment details Hnedpfjff Efajx Afpju Models TERSA with Tersa planer blade shaft Planer blade change in seconds When the machine is started, the planing knives are automatically clamped by centrifugal force - self-locking The blade projection adjusts automatically without using setting gauges Work table The work table is supported on four large trapezoidal threaded spindles, which ensure maximum stability in all working conditions With electrical table adjustment as standard Due to the special lifting device, the table position is maintained even without locking Helical toothed steel feed rollers for a constant and even wood feed second, rubberized feed roller at the outlet Massive recoil protectors prevent the recoil of workpieces A 4-knife shaft ensures an optimal planing pattern Dimensions and weights Length approx. 1305 mm width/depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter thickness 150 m

Condition: used, Year of construction: 2008, Dimensions (LxBxH): 196 x 125 x 14 cm Four-sided planer SCM Sintex NT Year 2008 380V 4 spindles Spindle bottom/top 7.5kW Spindle left/right 7.5kW Min/max working height 6-105mm Min/max working width 23-180mm Minimum workpiece length 300mm Throughput speed 6-12 m/min Input table 2300mm Spindle diameter 35mm Total dimensions 3400x980x1600mm (LxWxH), weight 1000kg - Year: 2008 - Documentation available: No - Transport dimensions: 1960mm x 1250mm x 140mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hnedpjwng U Rofx Afpsu Yorick Diebels

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Thickness working height min. 3 mm working height max. 230 mm Hnedpfxohkz E Tj Afpsu Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: used, Year of construction: 2003, Dimensions (LxBxH): 365 x 120 x 160 cm Four-sided planer SCM Compact P Year of construction 2003 Min/max working height 6/120mm Min/max working width 25/230mm Minimum input length is 450mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 120/165mm Input table length 2480mm Exclusive tools. Engines 1st Spindle - Under 5,5kW Hnjdjwnhtzopfx Afpju 2nd/3rd Spindle - Left/Right 7,5kW 4th Spindle - Above 7,5kW Dimensions 3600x1200x1500mm (LxWxH), Weight 1500kg - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 1 - Lubrication system: Automatic - Feed speed: - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 12 - Year: 2003 - Documentation available: No - Serial number: 021918 - Transport dimensions: 3650mm x 1200mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Hjdpfx Aehp Rc Ijfponu Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Hnjdeiidnfopfx Afpou Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Suction connection suction port diameter 2 x 120mm working table working table length 2500mm Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Hsdpfji Dphtsx Afpsnu Sturdy cast steel construction Anodized aluminum sliding carriage Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2020, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions With Aigner integral fence and 3-roller power feed - Machine in as-new condition - Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle assembly mounted on the table Especially sturdy design Smooth operation thanks to precision components and high dead weight Standard right/left spindle rotation with electronic lockout when changing direction 5 speeds from 3000 to 10,000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron table for lasting precision Easy operation thanks to controls and speed display on the front of the machine Standard fence with fine adjustment and aluminium fence jaws Powerful industrial motors Equipment details: Moulder fence Moulder fence adjustment with crank/wheel from the front With digital readout Quick-change spindle MK 4 quick-change spindle standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting work Scope of delivery: Manually tiltable spindle from +45° to -45° Speed indication via LED on the front Aluminium fence jaws Curved cutter guard Right/left rotation of the spindle MK 4 quick-change spindle Moulder fence with crank/wheel adjustment from the front with digital readout Hnsdpfoxac Eyox Afpou Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model CASADEI F 25 LL FK Item no. 5220728 Technical Data Working table dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. profiling tool diameter: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5 steps: 3000/4500/6000/8000/10000 rpm Motor power: 400 V / 50 Hz / S6-40% 7 kW Weight: 480 kg Extraction port diameter at fence: 1 x 120 mm Extraction port diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2025, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences Hodpfjcnxa Nox Afpenu with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: new, Year of construction: 2025, Description Hnedeff Hdpjpfx Afpeu Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Hjdpfx Aedqzcxefponu Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Description Hnjdpfx Ajff Hdmefpou Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Condition: as good as new (ex-display), Year of construction: 2025, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer Hnjdsdqzh Tjpfx Afpeu The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Combi 4-way HOLZKRAFT CU 410c F 26 N Tersa Hnjdjd Dtc Tepfx Afpsu -- Technical data -- - Circular saw - circumference 2.600 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 100 / 79 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 900 mm saw blade tilt 90° -45° - Dressing - working width 410 mm planing table length 1.660 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 410 x 605 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool Ø 210 mm spindle speed 3.500 / 6.000 / 10.000 rpm spindle Ø 30 mm - General - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: Ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Hnedpfeff Hdbox Afpou Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm Hnjdpfxsdqzh Rs Afpou