Used Hyundai Cnc Lathe for sale (165)

Condition: used, Year of construction: 2016, operating hours: 1,985 h, PLEASE NOTE: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HL 970 4x4 - Incl. bucket - Tyres: 26.5 R25 - Radio - Operating hours: 1,985 - Reversing camera - Air conditioning - Central lubrication system Bdedexhbigjpfx Abmoi Subject to errors and prior sale. Internal vehicle number: W50 PLEASE NOTE: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance.

Condition: used, Year of construction: 2012, operating hours: 5,925 h, Serial number: hhih0604cc000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20243 Specifications: - 2012 model - 5925 Hours - 24060 kg - 107 kW - Machine width: 310 cm - Track width: 70 cm Bdodpfjxdux Tsx Abmoi - Track controls - Rear hatch does not lock - Chassis should be replaced - Loose track plates - Gps - Excavator bucket - Hydraulic cleaning bucket can be included for an additional charge - Lights - Radio - Air conditioning/ac - Ready to deliver Description: We have a 2012 Hyundai Robex 235LCR-9 w/ Excavator bucket and gps for sale. The chassis should be replaced and the side hatch does not lock. Other than that, the machine works as it should according to the owner. But some additional costs must be considered. A hydraulic cleaning bucket can also be included for an additional charge. Ready to deliver Hours: 5925 Own weight: 24060 Total Weight: 24060 Width: 310 Kw: 107 Model: Robex 235LCR-9

Condition: new, feed pressure 8 bar Effective free air delivery 125/85 L/min Receiver capacity 24 / 8 l / bar Bdsdpfx Aeu Imhiebmei weight of the machine ca. 22,5 kg. Number of cylinders 2 Stk. motor 230V / 0,75KW V / KW range L-W-H 600 x 310 x 510 mm Exhibition machine!! This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: ready for operation (used), power: 99.29 kW (135.00 HP), Year of construction: 2008, Vehicle description Bjdpfov Eap Djx Abmjdi Wheel loader HYUNDAI HL740-7 Year of manufacture 2008 according to counter 15,752 hours approx. 12 tons 135 HP - incl. high-tipping bucket - Volvo quick coupler (without hydraulic cylinder) - additional circuit up to fork carriage - cabin with heating and air conditioning - original paint Sales price: 23,900.00 net Cheap delivery also possible! New pallet fork in stock for an additional payment!

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,619 h, General Data Machine weight 10000 Control Unit Brand FANUC Model 21i MB Main Drive Spindle speed range 80 - 12000 Spindle motor power 11/7.5 kW Tool taper NT 40 Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 2 x 900 mm Outer width 2 x 650 mm Min distance between vertical spindle and table 200 mm Max distance between vertical spindle and table 800 mm Table load 2 x 400 kg Tools Bedpfx Abjxizg Usmsdi Max weight 8 kg Max tool diameter 90 mm Max tool length 300 mm This 3-axis Hyundai Kia Hi-V600D vertical machining center was manufactured in 2011. Ideal for precision machining tasks, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia Hi-V600D machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2022, Technical details: Rated capacity: 13,5 kVA Revolution per minute: 20 U / min capacity: 11 KW type of fuel: Diesel voltage: 230-250 V / Hz battery: 45 A/h motor power: 11 kw weight: 318 kg dimensions L x W x H: ca. 1,2 x 0,7 x 0,9 m 2 St. Soundproofed (Silent) Diesel engine: LA290F; 2-cylinder; 3,600 rpm; tank capacity 53 liters; Battery voltage 12V Generator: LDG12S-3; voltage 400V / 230V; 3.600 rpm; power: normal power 10kW max. power 11kW Power class G1 Bdsdpfx Abeu Nvd Nemei *

Condition: new, Year of construction: 2022, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance. Hyundai HX 145A Bdsdpfxjxhbiaj Abmsi - New vehicle - Crawler excavator - Track drive - Rubber tracks - Without attachments - Radio - Operating hours: 16.9 - Engine 100 kW - Camera - Central lubrication system Errors and prior sale excepted. Internal vehicle number: W63 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance.

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, machine/vehicle number: 70TY5064, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,600 mm, total length: 1,640 mm, total width: 2,349 mm, table width: 380 mm, table length: 380 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 14, The Hyundai SPT-V30TD is a compact 3-axis vertical machining center designed for high-speed drilling, tapping, and light milling applications, typically found in precision component manufacturing environments. The machine features a robust structure and is equipped with a Yasnac CNC control—known for reliability and effective motion control. Main Specifications: Travel: X: 500 mm, Y: 300 mm, Z: 300 mm Spindle Speed: Up to 8000 RPM, with BT30 (ISO 30) spindle taper Table Size: 600 mm x 380 mm Max Table Load: 200 kg ATC: 14 tool capacity, carousel type Bedoxgdluspfx Abmedi Control: Yasnac J50M Machine Dimensions (L x W x H): 1640 x 2349 x 2600 mm Weight: Approx. 3500 kg Notable Features: Rapid traverse rates (X, Y, Z): up to 30 m/min Dual table/pallet changer is sometimes featured, increasing productivity Compact footprint designed for efficient shop floor space use Suitable for drilling up to 20 mm, tapping up to M16, and various milling operations Machine need to be fixed. It shows fault 310: Servo Off.

Condition: new, rated capacity 2,6/2,8 KW frequency 50 Hz output voltage 2 x 230AC / 1 x 12DC V tank capacity 15 l weight of the machine ca. 48 Kg dimensions of the machine ca. 700 x 500 x 600 mm A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. Bjdpfxju Imnvs Abmedi - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet; only 59 dB (A) at a distance of 7 m. - Fuel: Euro unleaded

Year of construction: 2021, condition: new, Field of application: Construction Attachment suited for: Loaders Bucket volume: 6.5 m^3 Bdsdpfx Ajpa Rnwjbmsi We manufacture high dump bucket sets for all brands-models. The bucket in the photo is made for the Hyundai HL760. The capacity of bucket is 6,5m^3 For detailed information please contact us.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 21,927 h, Control Unit Brand FANUC Model Series 21i-MB General Data Measurements width 2770 mm Measurements depth 4950 mm Measurements height 2804 mm Machine weight 15000 Main Drive Spindle speed range 8000-12000 Spindle motor power 22 kW Number of axis 4 Movement X-Axis Movement 850 mm Y-Axis Movement 700 mm Z-Axis Movement 750 mm Workpiece Workpiece weight 500 kg Bdedpfxjxfwxlo Abmei Table Outer length 500 mm Outer width 500 mm Tools Max weight 8 kg Max tool diameter 40 mm Max tool length 400 mm This HYUNDAI KIA HS500i Horizontal Machining center was manufactured in 2008. The 4 axis machine has a total of 21927 working hours. It operates through a FANUC Series 21i-MB control unit. The machine reaches a 12000 rpm spindle speed. It is in good technical condition, has full documentation and is ready for testing. Application Types Milling

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Built in 2005, it is equipped with a Siemens 810D CNC control and features ideal for multi-axis machining, including automatic tool change and dual-pallet machining capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of Manufacture: 2005 CNC Control: Siemens 810D Machine Weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle Taper: ISO 40 Spindle Speed: 10,000 rpm Bedjxfarhspfx Abmodi Spindle Motor Power (cont. / 30 min): 12 / 16 kW Machining Capacity X-Axis Travel: 570 mm Y-Axis Travel: 410 mm Z-Axis Travel: 580 mm Distance from Spindle Nose to Table Surface: 197 – 777 mm Distance from Column to Spindle Center: 495 mm Table Table Dimensions: 2 x (650 x 410 mm) Number of Tables: 2 Maximum Table Load: 2 x 200 kg No. 2 Rotary Tables Ø160 mm with counter support Feed Rates Rapid Traverse X/Y Axes: 36,000 mm/min Rapid Traverse Z Axis: 30,000 mm/min Cutting Feed Rate X/Y/Z Axes: 1 ÷ 10,000 mm/min Automatic Tool Changer Tool Taper: BT-40 Tool Magazine Capacity: 24 stations Max. Tool Diameter: Adjacent Tools: Ø90 mm Non-adjacent Tools: Ø150 mm Max. Tool Length: 300 mm Max. Tool Weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line chiller Transformer Manuals, electrical diagrams, and CE Declaration

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HX 220AL - New vehicle Bsdpsxhbhvefx Abmsdi - Crawler excavator - Track drive - Without attachments - Radio - Operating hours: 15.7 - Engine: 129 kW - Camera - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W64 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance.

Condition: used, mileage: 63,791 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,160 kg, first registration: 05/2016, loading space length: 2,375 mm, emission class: euro5, color: white, number of seats: 3, total length: 5,150 mm, total width: 1,920 mm, total height: 1,925 mm, Equipment: ABS, air conditioning, central locking, soot filter, Errors and prior sale excepted! Internal number: 1051. U780351 ----EQUIPMENT * Manual air conditioning – incl. pollen filter and recirculation switch * PIONEER radio with CD player * Transmission: 6-speed manual gearbox * Fog lights * ABS with EBD * Passenger side airbag * Driver side airbag * Exterior mirrors (2), electrically adjustable and heated * Brake assist * Rear double-wing doors * Tachometer * ESP (Electronic Stability Program) * Power windows, front * Tinted windows * Heated rear window with timer * Height-adjustable headrests (2) * Paintwork: Solid paint Bodpfohznt Rjx Abmodi * Particulate filter: Diesel particulate filter * Upholstery: Fabric * Sliding side doors, closed * Mud flaps front and rear * Side impact protection * Power steering * Passenger double bench seat * Driver’s seat longitudinally adjustable * Partition with viewing window * Lashing eyes (10), lateral * Immobilizer * Central locking ... and much more. ----The vehicle is unprepared! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to consider your vehicle as part of a trade-in. Financing / leasing possible without down payment! Do you have any questions? We are happy to assist you!

Condition: new, rated capacity 3,0 KW rated current 16/8,3 Ampere output voltage 2 x 230AC / 1 x 12DC V Bdjdpfju Imf Uox Abmji tank capacity 12 l engine output 7,0 PS weight of the machine ca. 45 Kg dimensions of the machine ca. 0,68 x 0,58 x 0,54 m Exhibition machine!! The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine)

Year of construction: 2022, condition: new, Attachment suited for: Construction machines Bdsdeph Rmropfx Abmsi GALEN Demolition grapples with 360° rotation system is a kind of excavator attachments that are used for demolishing, material handling, and sorting of all kinds of materials such as rocks, scrap, and other debris. The machine model on the photo of grapple and mechanical quick coupler is Hyundai HX220L For inquiries and detailed information, please contact us

Condition: used, Bucket: Included Quick Coupler: Included Engine Power: 105kw Weight: 13310kg Bsdpfx Abeuf Ha Demjdi

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Table Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Bdsdsxfaqwjpfx Abmoi Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: good (used), functionality: fully functional, mileage: 6,500 km, power: 106.65 kW (145.00 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 24,000 kg, empty load weight: 24,000 kg, operation weight: 24,000 kg, lifting height: 943 mm, Year of construction: 2011, operating hours: 6,500 h, machine/vehicle number: HHIH0604TB0000030, Equipment: additional headlights, adjustable boom, cabin, hydraulics, Dear Sir or Madam, We are selling a Hyundai Robex LCR235 crawler excavator. It is in a generally good used condition. All functions are present and it performs them without any problems. Technical data: Year of construction: 2011 Operating hours: approx. 6,500h Weight: 24,000kg Total width: 3.20m Range: 9.43m Engine power: 107kw/145hp Bsdpsvmwp Dofx Abmedi The price is net and negotiable after viewing. If you have any further questions, please do not hesitate to contact us. Dear Sir or Madam, We are selling a Hyundai Robex LCR235 crawler excavator. It is in a generally good used condition. All functions are present and it performs them without any problems. Technical data: Year of construction: 2011 Operating hours: approx. 6,500h Weight: 24000kg Total width: 3.20m Range: 9.43m Engine power: 107kw/145hp The price is net and negotiable after viewing. If you have any further questions, please do not hesitate to contact me.

Condition: used, Year of construction: 2019, operating hours: 5,960 h, Year of manufacture: 2019 Drive: Wheel Empty weight: 19.000 kg Bjdpfx Aboxb Aukomodi Dimensions (LxBxH): 876 x 250 x 342 cm Digging depth: 5.9 m

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Bodpju Ehi Aofx Abmedi Table load 600 kgs, Spindle speed 8,000 rpm, Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Fanuc I series, coolant, swarf conveyor.

Condition: new, Year of construction: 2023, Hyundai R140 General Purpose Bucket Bdodpfjp I E U Uox Abmsi

Condition: new, functionality: fully functional, shovel volume: 2.8 m³, machine/vehicle number: 62WC-90011, - Wheel loader bucket - Volvo system attachment - Weight 1235 kg - Volume 2.8 m³ Bodjvr Tnaopfx Abmsdi - Cutting edge width: 2.80 m

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,400 h, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 40, mount diameter: 40 mm, Equipment: chip conveyor, High pressure 20 bar MACHINE EQUIPPED WITH: Bjdsxb Rtbspfx Abmodi 4 vices + 40 cones + arbors + tools

Condition: new, Year of construction: 2024, Machine: Hyundai HX225 Edge Length: 1200mm Bedpfjr Ar Ansx Abmodi Capacity: 1.2m^3 For detailed information and inquiries please contact us. Galen Group produces buckets for 20years