Used Mini Metal Lathe for sale (3,205)

Condition: used, Year of construction: 2001, turning diameter 720 mm turning length 2.000 mm control FAGOR 8055 turning diameter over slide 470 mm feed 8 m/min spindle nose DIN-55027-11 spindle passage 104 mm number of spindle speeds 0-1600 U/min/rpm spindle drive 17/ 20.5 kW Torque 1590/1920 Nm total power requirement 28 kW weight of the machine ca. 4.9 t dimensions of the machine ca. 6.600 x 2.300 mm Tailstock Tailstock quill diameter: Ø 100 mm Tailstock quill travel: 200 mm Tailstock quill taper: Morse taper MT 6 Turret 4-position automatic turret Machine Equipment Full rear protection enclosure Hydraulic 3-jaw chuck SMW AUTOBLOCK 400 GH Fixed steady rest, capacity 50–220 mm Dcsdpfxex Hp Dfo Ah Sjb Maximum Permissible Weights Max. workpiece weight between centers: 2,560 kg With 1 steady rest / with 2 steady rests: 3,200 kg / 4,000 kg Free-standing, center of gravity at 250 mm: 800 kg

Condition: good (used), functionality: fully functional, Machine specifications: Swing over bed: 1300 mm Maximum turning length: 4000 mm Description: Dcodpfx Ahex H Ifzs Ssb The machine is in good technical condition; test run is possible by prior arrangement. Machine weight: 15,800 kg Machine dimensions (L x W x H): 7,425 x 3,475 x 2,535 mm Connected load: 82 kVA Center height over bed: 650 mm Maximum workpiece weight between centers: 10,000 kg Maximum swing / machinable diameter over cross slide: 940 mm Maximum swing / machinable diameter over bed: 1300 mm Maximum turning length / distance between centers: 4000 mm Spindle bore diameter: 104 mm Spindle diameter at front bearing: 180 mm Spindle speed range (rpm): 1st gear 0-100, 2nd gear 0-200, 3rd gear 0-400, 4th gear 0-800 Rapid traverse of longitudinal slide – max. working feed: 8 m/min Rapid traverse of cross slide – max. working feed: 6 m/min Tailstock quill diameter: 180 mm Quill stroke: 300 mm Accessories: SAUTER turret 0.5.480.532, Universal chuck 800 mm, Faceplate 1200 mm, Steady rest – small 300 mm, Steady rest – large 500 mm, Chip conveyor with container.

Condition: excellent (used), Year of construction: 1987, turning diameter over cross slide: 1,000 mm, turning diameter: 720 mm, turning diameter over bed slide: 1,000 mm, turning length: 3,000 mm, Lathe Geminis GE 1000S Max. turning diameter over cross slide: 1000 mm Dcsdpjuv Ehqjfx Ah Seb Max. turning diameter over support: 720 mm Turning length: 3000 mm D.R.O. Heidenhain

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 3,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description Manufacturer: Geminis Model: CNC 4 Plus Control: CNC Fagor 8055 FL-BT Capacities: Distance between centers: 3,000 mm Swing over bed: 720 mm Swing over cross slide: 470 mm Spindle bore: 104 mm Tailstock diameter: 100 mm (Morse 6 taper) Bed width: 550 mm Speeds: 2 speed ranges: 0–1600 rpm Rapid traverse: X-axis: 8 m/min Z-axis: 8 m/min Motor: Power: 22 kW Weight: 8,000 kg Equipment: CNC Fagor 8055 FL-BT 3-jaw SHUNK Rota-S Plus chuck Ø 315 mm Additional 3-jaw chuck Fixed steady rest Chip conveyor General condition: Lathe in excellent condition Dsdpfswuligex Ah Socb

Condition: used, Year of construction: 1974, Technical details: Dcsdpsu Ix Dcsfx Ah Seb turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The used, FULLY REFURBISHED self-learning CNC lathe GEMINIS GHT4 720X3000 is a robust, medium-large parallel bed lathe equipped with FAGOR 8055 CNC, center height 360 mm, distance between centers 3000 mm, spindle bore 106 mm. Dcjdpfx Ahoxdvbcj Sob The machine is COMPLETELY REFURBISHED AS NEW, including bed grinding, carriage grinding, Turcite overlays, spindle bearings, axis bearings, axis screws, electrical system, motor overhaul, new drives, new FAGOR keyboard, etc. The equipment is completed with prearrangement for automatic turret, manual self-centering chuck, and 2 steadies.

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Featured with: - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders Dedpfsw Sm U Dsx Ah Secb - Coolingpump/chiptray at back end - Machine documentation Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: excellent (used), Year of construction: 2015, CNC Lathe with c-axis GEMINIS - GHT4-G4 MACH-ID 9182 Make: GEMINIS Type: GHT4-G4 Control: FAGOR 8055 TC Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial  Driven tailstock Dsdpfjwzh Eqox Ah Sjcb  Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore 3 guide way bed width 750 mm Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Power live tools:7.5kW Pinole taper: 5Mk Stroke pinole: 250mm Workpiece load: 2500 Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, CNC Lathe - Horizontal / Brand: GEMINIS / Type: GEMINIS GT9 G2 (heavy series) / Year of construction: 2015 The machine can be inspected by appointment under power. TECHNICAL DATA: - Max swing over bed: 2.000 mm - Distance between centers: 8.000 mm - Height of centres: 1.050 mm - Swing over slide: 1.600 mm - Main spindle bore Ø: 150 mm - Main spindle nose: DIN 55026-15 - Speed range: 4 - Speed range I: 0-80 rpm - Speed range II: 0-175 rpm - Speed range III: 0-350 rpm - Speed range IV: 0-700 rpm - Cross slide travel: 1.060 mm - Quill Ø: 400 mm - Quill travel: 300 mm - Max. weight allowed between centers: 30 tons Machine base: - Distance between the guideways: 1.350 mm - Height of the machine base: 650 mm EQUIPMENT / ACCESSORIES: - CNC-Control: FAGOR 8065 - Independent 4-jaw chuck: Ø 1.600 mm - Set of hard inner and outer claws - Square automatic turret: SAUTER 4 pos – Ø 320 x 320 mm - Tailstock and quill: Motorised - Quill placement: Built-in Rotating Dedpfxevuih Us Ah Sjcb - Automatic Locking/Unlocking of the tailstock body - Air conditioner for electronic cabinet - Portable electronic handwheel - Chip conveyor - 4-support Closed steady rest: Ø 500-900 mm - Permissible weight allowed for steady rest: 10 tons - Prepared for C-axis with transmission from main engine - Preparation for subsequent adaptation of a milling head with Y axis on turret - Preparation for rectifier head assembly - Very well-equipped with tools Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, Geminis lathe model GE 870 of 4000mm between points, turning on bed 870mm, turning on cross slide 580mm, turning on neckline 1100mm, length of neckline 340mm, speeds of 13-1000rpm, diameter of the hole of the shank 84mm, has mounted plate 3 claws diameter 315mm, has plate 4 independent claws of diameter 500mm, has fixed steady rests, lathe in general in good condition. Dedswqz D Eopfx Ah Socb

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U Dsdpfxsvvrpkj Ah Secb cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Year of construction: 1985, condition: refurbished (used), LATHE GEMINIS GE 650 Dcjdpsggly Sofx Ah Sjb -LENGHT 4200mm -HOLE 85mm -DIAMETER ON SLIDES 650mm -DIAMETER ON SUPPORT 400mm

Condition: excellent (used), functionality: fully functional, GEMINIS GE1000 Dcsdpfxswtnias Ah Sob 1000X4000 mm

Condition: reconditioned (used), functionality: fully functional, Locatelli Miniariete 35 Automatic Lathes Maximum material length: 1000 mm Maximum machined material length: 100 mm Automatic material feeder CE certificate Complete DTR technical documentation Main motor power: 3/4 kW Dsdpfx Ahjx Ar Ivj Socb

Condition: excellent (used), Genini Miniautomatic Pass-Through Lathe Turning machine from square timber Main spindle with a two-speed motor with a power of 4.9/5.9kw Hydraulic pump motor with a power of 1.5kw Maximum length of square timber 950mm Maximum turning length 120mm Maximum turning diameter 80mm Two supports with profiling knives 1 front spindle for drilling or front profiling Djdpfev Hgctex Ah Secb 1 roughing turning knife Machine weight approx. 1800kg

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Specifications Manufacturer MONFORTS Model RNC4 Year 1993 Description WE OFFER AN VERY NICE CONDITION MONFORTS CNC LATHE INCLUDING COMPLETE TOOLINGS DRAWERS FOR TOOLS MACHINE HAS LIVE TOOLS , DRIVEN TOOLS MACHINE IS CONECTED ON POWER Dcsdpfsvk E A Tjx Ah Sob TECHNICAL INFO: Diameter 420 mm Distance between centers 600 mm CNC system Control System F Tools 12 positions Cross travel 250 mm Longitudinal travel 620 mm Hole through spindle 65 mm Spindle speed 70 - 4000 RPM Motor power 18,5 HP Weight 7500 Kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Dcsdexpqm Rspfx Ah Ssb Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Dcsdewhylvepfx Ah Ssb Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, WE OFFER AN VERY EXCELLENT CONDITION CNC LATHE PROTEO WITH TURNING MILLING INCLUDING BAR FEEDER BOSS 332 E YEAR:2013 NEW Dsdpfxjvk R Sge Ah Secb AND TOOLS -ACCESSORIESS MAX BAR 25mm FAGOR OPERATION CONTROLS

Condition: good (used), functionality: fully functional, MACHINE IS IN GOOD WORKING CONDITION Dsdevkycnjpfx Ah Secb Machine need NEW TAILSTOCK Machine Has ben used in Switzerland, Specifications Manufacturer CAZENEUVE Model HB575

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, WE OFFER AN VERY NICE CONDITION 5 AXIS CNC LATHE HWACHEON MACHINE IS WORKING IN DAILY PRODUCTION ORDERS, SOLD WILL BE BECAUSE SOON IS COMING A BIGGER NEW. MODEL: CUTEX -180BL YSMC YEAR: 2019 HEAD STOCK HEIGHT: 1130mm MAX SPINDLE SPEED: 4500 RPM MAX CHUCK DIA: 8 INCH MAX CHUCK SPEED: 5000 RPM MAX WORKING DIA: DIAMETER 300 X 425 L Dcjdpfov Acpnsx Ah Sjb WEIGHT: 4700 KG RATED VOLTAGE: 3 PE / 220 V (ac) FREQUENCY 50HZ ELECTRICAL POWER SUPLY 35 kWA RATED CURRENT 100A SHORT CIRCUT CURRENT RATING 5 kA LARGEST MOTOR 95 A CIRCUIT BREAKER CAPACITY 100A AMPERE INTERRUPTER CAPACITY 50 kA AIR SUPPLY: 0.5 MPa

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Description WE OFFER AN NICE WORKING CONDITION INDEX ABC 42 - TWO MACHINES WE HAVE AWAILIBLE TWIN SPINDLE TWIN TURRET INCLUDIN COMPLETE TOOLINGS AND SPARE PARTS MACHINE IS CONECTED ON POWER AND CAN BE INSPECTED UNDER POWER FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL Machine Category CNC Turning- and Milling Center Make INDEX Type ABC 42 (*934) Year 2004 Control C200-4 / 840C Siemens Country of origin Germany Djdpfx Asvk E Nmsh Sscb Other information CNC - Turning- and MillingCenter INDEX - ABC 42 - two turrets - live tool stations - subspindle on upper turret - 1x back drilling device - with percussion unit - many accessories Technical Details Backside processing: C-Axis 0,001 ° change-time tool to tool 0,2 sec clamping diameter max. 42 mm clamping length max. 38 mm control C200-4 / 840C Siemens dimensions of the machine ca. 7,0 x 3,0 x 2,5 m Driven Tool Positions: 8 Feed force X: 8,3 / Z: 5,5 kN Fixed tools max. 5 pos Main spindle: max. Torque 7,5 Nm number of toolpositions 6 pos. power capacity - driven tools 3,3 kW power capacity - main spindel 13 / 21 kW rapid traverse X: 16 / Z: 24 m/min shaft cross cut 25 x 48 DIN 69880 spindle bore 15,5 mm spindle diameter in front bearing 85 mm spindle hollow 36 mm spindle passage 36 (42) mm Spindle speed - driven tools 6.000 min -1 Spindle speed range subspindle max. 4.500 min/-1 Subspindel: total power requirement ca. 30 kW travel -x axis 81 mm travel -z axis 80 mm turning length max. 280 mm turning speed range - main spindle max. 6.300 min/-1 Turret 1: Turret 2: weight of the machine ca. 3,0 t Accessories bar feeder Index LM 3200 Chip conveyor Coolantsystem Documents driven tool stations hydraulic system parts catcher Subspindle Turret 2x

Condition: excellent (used), Year of construction: 1985, functionality: limited functionality, Description Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm Dcjdpfx Ahjvk E Ays Seb CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x - rotating yes milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, WE OFFER UNIVERSAL LATHE WITH BRAND NEW 3 AXIS DIGITALS COMPLETE TOOLS AND ACCESSORIESS. DESCRIPTION Description Precision lathe, turning machine -Manufacturer: VDF Heidenreich & Harbeck Dedpfxevkpkze Ah Secb -Machine bed rails: hardened -Turning length: 750 mm -Turning Ø over bed: 500 -Turning Ø over recess: 355 mm -Turning Ø over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 7.5 kW -Accessories: 1x steady rest, 6x Multifix tool holder, -Dimensions: 1180/3050/H1345 mm -Weight: 2000 kg

Condition: good (used), Emco Compact 10 Lathe Made in Austria. The machine is in perfect condition, practically unused. Dcjdpfx Ahex Ncucs Seb The machine comes from a maintenance workshop at a printing house. It has not been used in production. Accessories are included.